1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 461Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 461

Power TrimTilt Servicing Removal 1V4Mark angle adjusting rod location and remove rod2Lift engine manually and engage tilt
tray to catch the hydraulic oil as it drains from the unitNeutral ize the internal pressures of the power trimtilt unit before
disassemblingUsing battery, operate the unit until the trim and tilt cylinders are completely downReverse the connections
on the battery and momentarily operate the unit There may be high pressure behind some check valves and in hydraulic linesTo
prevent possible eye injury, when removing lines and check valves, be sure to keep clean, "Iint free" shop cloth covering
them until the pressure is releasedUse eye protectionDo not apply heat to the trim manifold or cylindersExces- ill sive temperature
can cause high pressure leaks or failure of partsAlways use "Iint free" shop cloth when handling power trim and tilt componentsIf
painting the unit is required, paint the unit after it is completely assembled Painting of individual components may cause