1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 470Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 470

COA2478 COA2479 dLubricate a-rings of check valve to be tested and install valve in OMC Tester, PIN 390063Torque valve to
42Using the same smooth flat tool, remove the a-ring from the end capsDiscard the a-ringsClean both end caps and scrape all
corrosion or loose paint from the threads in the outside a-ring area1691 43There are two different types of seals in the
trim end capsThe one pictured on the left is an a-ring The one pictured on the right is quad-ring The quad-ring is used for
service 1701 44Oil new quad-ring and install in the groove in the trim end capsOil and install new scraper To aid in the
installation of the scraper, warm the scraper in hot water 1711 45Oil new outside a-ring and back-up ring Install them on
the trim end capsThe back-up ring goes on top1721 46Remove both trim pistons and rod assemblies from the manifoldTo remove,