1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 474Get this manual

1994 Johnson Evinrude "ER" 90 LV 120 thru 140, 185 thru 225, 250, 300 Service Manual P/N 500612, Page 474

18 COA2503 f181 20Inspect the rubber keeper on the pump drive coupling The rubber keeper provides cushion between the motor
fill the cavity where the pump is mounted, up to the top of the filter r;;:;] 24Using screwdriver, rotate the pump coupling
several turns clockwise and then several turns counterclockwise until no more air bubbles come out of the pumpIt is very
important that the pump area be filled with oil and purged of air because the pump could be damaged if installed dry 1231
25Clean the bottom of the motor where it engages the manifoldInstall new O-ring on the motorPosition the motor on the manifold
and install the three screws and lock washersTighten the screws securely 1241 26V4Mount the bottom flat end of the tilt cylinder