1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 37Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 37

Synchronization and Linkage Adjustments It is important that this step-by-step procedure be followed in sequence and be performed
spark plug hole and turn in center portion until it contacts the No.1 pistonLock the tool in place with ring While holding
the flywheel firmly against the tool, mark the flywheel directly across from the pointerConsider this mark rv theContinuecontact
is felt againin clockwise direction until 5to turn the flywheel piston Mark this exact spot on the flywheel and consider
this mark "B"Remove the piston stop tool Use flexible scale along the flywheel edge and measure the midpoint between marks
"A" and "B"Mark the midpoint on the rim ofthe flywheelConsider this mark "C" Ifthe mark "c" and the cast-in TOC line are
in agreement, the timing pointer alignment is correctIf not, proceed to Step 7 "c" with the pointerHold the flywheel in this