1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 46Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 46

Electrical Cable Insta llation i electrical systemsFailure to do so could result in injury from electrical sparks or from
'sl 7Manual Tilt odelsInstall battery cables, electrical cable lJ and VRO Low Oil Warning wire in grommet Install clamp and
secure with two screwsf6l 8TrimTilt ModelsBundle the electrical cable, the trimtilt cable, battery cables and the VRO Low
Oil Warning wire, and wrap the cables using the piece of rubber wrap supplied with the battery cables Install tie strap around
rubber wrap Twist tie strap around so the connection is facing down to fit in lower engine cover Tighten and cut tie strap
Place rubber wrap in opening in front of lower engine coverInstall clamp and secure with two screwsAfter installation, verify
that there is sufficient clearance for all cables to avoid binding or chafing through all engine steering and tilting angles