1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 50Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 50

Heli-Coillnserts and Installers rv threadsThe installation kit consists of drill,totap, and damaged Use these Heli-Coil inserts
PCE0027 391436 391438 391439 391440 391441 391450 984963 391437 391448 391447 391446 391445 391444 391449 913412 391443 391442
Installation Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil tap supplied with packCheck
thread size on shank to make certain proper size is used3Screw insert onto mandrel until tang is fully engaged in driving
contour4Screw insert into tapped holeTop of insert must be onequarter to one-half turn below top surface5The tang must be
removed to allow full passage of screw into the insertThe tang may be broken off cleanly at the notch in the bottom coil
with punch or rod having diameter that just fits into the assembled insertMake sure that the punch or rod has square end