1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 56Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 56

3Anti-Siphon Valvesafety standards require permanently installed fuel systems to have anti-siphon protection This protection
for V4 and smaller engines, while minimum of 5 16 in(7,9 mm) is requiredDistribution lines must be USCG Type "A 1" or81Vinyl
hose must not be used in permanently installed fuel distribution system5Fuel Distribution Fittingsall fittings must have
minimum inside diameter of 14 in(6,4 mm), while 9 32 in(7,1 mm) is preferred6Fuel Filterfuel filters must have pressure drop
of no more than 0.4 in of mercury (Hg) at flow rate of 20 gallons per hourThe filter should have minimum filtered area of
200 square inches (1290 cmOMC Fuel Filter Kit, PIN 174176, meets these requirements 7Fuel System PrimingOMC Electric Fuel
Primer Kit, PIN 174651, is available for built-in fuel systemsThe kit mounts near the fuel supply and, when activated, fills