1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 66Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 66

8 DR1438 1sl 4.lnstall and secure 10-in(25 cm) length of in(6,35 mm) I.Dclear vinyl hoseA few inches from the loose end,
or by putting light finger pressure on the outlet hose At 800 RPM, the oil level in your hose should drop in(25,4 mm) in
approximately five pulses At full throttle, the oil level in your hose should drop in(25,4 mm) in approximately three pulses7If
your results vary, check the pulse limiter fitting before replacing the pump8If you remove the pump, carefully cut the hose
to avoid damaging the fittingWhen installing, use ratchet clamp on the oil supply hoseTorque the screws, pump-to-bracket,