1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 75Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 75

Inspection 1sl 1To test the solenoid windings, calibrate an ohmmeter on low ohms scale and connect between the purplewhite
fittings should come out 1sl 3To inspect or replace internal components, remove the four solenoid cover screws 19l 4When
assembling solenoid, back out screws in their holes to engage original threadsthen, tighten securelyInstallation 1Attach
purplewhite leads and three hosesSecure large hose with tie strap2Install solenoid and bracketPosition ground lead under