1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 85Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 85

Inspection 1Inspect the leaf plate assemblies for damage The gasket surface must be flat, 0.003 in(0,08 mm) The leaf plates
plate, turn the leaf valves overUsed leaf valves must not be turned over for reuseLeaf valve may break when returned to service,
causing serious powerhead damage2If any leaf valves are standing open, apply light pressure using pencil eraserIf leaf valve
closes with light pressure, valve is acceptableIf not, inspect leaf plate for high spots or burrsDo not lap leaf platesIf
plate is too smooth, the leaf valves may stick closed after off-season storage3Apply OMC Locquic Primer to mounting screws
and allow to air dryf41 4Apply OMC Screw Lock to mounting screwsWipe off excess adhesive5Assemble leaf valve shim (if required)