1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 118Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 118

6 DR4098 STEPCHARGE COIL TESTS Ground Test 1Disconnect 2-pin Amphenol connector between the stator and power pack2Set peak-reading
and repair ground, or replace stator assembly4If no reading is indicated in Step 3, go to Output TestOutput Test 1Set peak-reading
voltmeter to "POS" and "500"r:;!7 2Attach voltmeter black lead to stator connector terminal" A"Attach voltmeter red lead
to terminal 3Crank engine and observe meter If meter shows 150 volts or higher, go to STEPSENSOR COIL TEST If meter shows