1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 136Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 136

rJl9Pull overboard water indicator hose off fitting in the lower engine cover f8110Remove the six long exhaust housing to
pullIf pushing won't separate hose and fitting, carefully cut the hose along its side and peel it back to avoid damaging
the fittings f'12l13Use OMCUniversal Puller and Lifting Eye, PIN 321537, or OMC Lifting Fixture, PIN 396748, to lift and
remove the powerhead assembly14Thread nuts onto the powerhead studs until flush to protect the threads15Place the powerhead
in suitable holding fixture and remove all carburetion, ignition, and electrical components from the powerheadTo simplify