1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 141Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 141

COB1364 1221 14r:;:;l Lift crankshaft and crankcase heads from cylinder block and place on bench for disassembly 15Replace
punch through bottom of bearing to engage seal lip and drive seal out with malletDO NOT reuse sealIf bearing is damaged,
crankcase head and bearing assembly must be replaced 125 17Remove the upper crankcase head from the crankshaft 1261127 18
Remove four screws (lower crankcase head to lower bearing retainer plate) and remove lower crankcase head from crankshaftRemove
seal by driving out with punch and mallet, then discard sealRemove and discard the O-rings Discard the four lower crankcase