1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 151Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 151

12911301 37Secure restraining jaw "C" and forcing jaw "0" to framef311 38Tighten the rod cap screws to torque of 25-30 inIbs(2-3
rodThe groove lines on the jaws must be centered on the rodcrankpin diameterThe above procedure must be followed to assure
frame is squarely in position1341 40Tighten the forcing screw to torque of 23 inIbs(2,5 Nm) 41Loosen both rod cap screws
14 turn1351 42Apply preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws43Apply final torque of 30-32 ftIbs(40-43