1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 172Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 172

Installation 34 'If removed, apply soapy water to the two lower mounts and place the mounts in the exhaust housingPosition
Install and tighten the screws to torque of 50-60 ftIbs(68-81 Nm)3Install and tighten the four lower mount screws to torque
of 38-45 ftIbs(51-61 Nm) 4Position the lower engine cover on the adapter5Place the port and starboard frames with seal on
the lower engine coverSecure the frames to the cover6Install and tighten the two lower engine cover rubber mount screws with