1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 203Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 203

23The forward gear bearing and bearing housing are serviced as an assemblyIf either is worn or damaged, replace the entire
Bearing Remover and Installer, PIN 391257: -20 inHex Head Screw in0.0Flat Washer PIN 326582 Rod PIN 391260 Plate PIN 326574
Remover -20 inHex Head Screw Position the tool in the gearcaseUsing mallet, drive the bearing from the gearcase 1271 vsCD
PIN 326586 Flange Nut PIN 391260 Plate PI 326582 Rod PIN 326579 Remover Make sure all 18 needle bearings are inside the bearing
case before pulling the bearing The needles provide surface for the remover to pull againstUse 13s inwrench to hold the remover