1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 220Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 220

1sl13To assemble inner and outer seals to bearing housing, install outer seal retaining ring into its groove in the bearing
using socket slightly smaller than the outside diameter of the sealWhen the seal is seated, install the inner retaining ring
1,2l16Remove the seal carrier assembly and thrust washer from the driveshaft 17Remove the retaining ring with retaining ring
pliersWear safety glasses and proceed with care to avoid unsnapping the ring from the pliers 18Inspect driveshaft bearings