1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 227Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 227

r,;] [:;1 9Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24
Adjustment 1Move remote control handle to NEUTRAL detent f81 2Hold reverse gate up and check for proper clearance between
reverse gate and water flow passage : in(11,9 mm) 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while
holding reverse gate up, until proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle
to FORWARD detent 19l When t=.J the roller is in FORWARD positionapply hand pressure to move the reverse gate up, toward