1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 233Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 233

Battery Specifications 5] For each motor provide one battery that is: 12-volt, heavy-duty, designated "marine" Ventedrefillable
and cause errant warning horn signals or electrical system damageApply OMC Triple-Guard grease to connections i If the battery
mounting system does not cover the connections, install protective coversThis will help prevent shorting or arcing at the
battery terminalsBattery Devices Battery IsolatorsIfthe engine is equipped with fully regulated charging system and it's
supporting two or more batteries, use only one of the following isolators (made by Guest Products): One engine to two batteriesModel
2420 One engine to three batteriesModel 2424 Two engines to three batteriesModel 2423 Battery ON-OFF SwitchesAny master on-off
switch in the engine's electrical system must contain "make-before-break" circuit to protect the engine's charging systemAvoid
switching batteries while the engine is running, and turn the switch off only while the engine is stopped Battery Testing