1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 241Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 241

Starter System Voltage Drop Test By making systematic check of the starter system, any component or electrical connection
terminalTurn key switch to START to crank engineVoltage reading should not exceed 0.3 voltIn Step 2, connect the voltmeter
leads only while the engine is cranking, or damage to the voltmeter can occurf51 2Connect voltmeter negative lead to the
starter side of the solenoid terminalWhile cranking engine, connect voltmeter positive lead to starter solenoid opposite
terminalVoltage reading should not exceed 0.2 voltRemove voltmeter positive lead from starter solenoid and stop cranking