1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 245Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 245

Solenoid Check All engine wiring must be disconnected from the solenoid before proceeding with this testf1911Calibrate ohmmeter
with OMC Black Neoprene Dip No Load Current Draw, Electric Starter Securely fasten starter in vise or other suitable fixture
before proceeding with this check1Locate battery rated at 350 CCA (70 amphrs or higher that is in good condition and fully
charged, to perform this test Connect 0-50 amp ammeter in series with heavy jumper between the battery "+" terminal and the
starter "+" terminal 3Attach or hold vibration tachometer, such as Frahm Reed tachometer, to the starter while performing
the test 1201 4Complete the circuit with heavy jumper between the battery "-" terminal and the starter frame 5Monitor the