1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 263Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 263

Description of Operation FasTrak'" power trimtilt unit is completely contained between the engine's stern bracketsThe system
travelsManual Operation engine can be positioned manually anywhere within its 75 of travel by first opening (loosening) the
manual release valveaccessible with screwdriver through hole on the outside of the port stern bracket Refer to Manual ReleaseUP
and Manual ReleaseDOWN in this section for details of positioning the engine manually and for details of system operations
while moving the engine manually f21 trim gauge is provided with the motorA sending unit is installed on the port stern bracket
that is accessible when the engine is fully tilted f31 For trailering the engine while it is tilted, trailering bracket is
provided to protect the hydraulic systemTo use the trailering bracket, tilt the engine up fully, engage the bracket, then
tilt the engine down until the bracket is firmly in positionThe trim cylinders will remain extended For mooring or storing