1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 279Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 279

DR4684 DR3950 Power Supply Troubleshooting Before beginning this procedure: Charge battery and connect battery cables Turn
4Connect voltmeter red lead to Vl and black lead to V2 If no voltage at Vlcheck red wire between starter solenoid terminal
and relay socketsIf red wire is OK, check black wire between relay sockets and engine ground If voltage at Vl, go to Step
5GJ 5Connect voltmeter black lead to clean engine ground, and voltmeter red lead to V3 (bluewhite) GJ '6Push control box
UP trim button If no voltage at V3check control box trim switch and wiring, and go to Step If voltage at V3go to Step 7 [!]
7Push lower motor cover UP trim button If no voltage at V3check for voltage at bluewhite bullet connector out of lower motor