1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 281Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 281

Relay Ohmmeter Tests bracket will vary from model to model, but the relay terminals are always connected to the electrical
ColorBlue or Green To protect your test light or ohmmeter, remove relays from sockets before proceeding with test1Use an
ohmmeter calibrated on high ohms scale or continuity light to test continuity2Connect meter leads to relay terminals "B-and
"M" The meter must show continuity] 3Connect meter leads to relay terminalsB+" and "MThe meter must show no continuity4Calibrate