1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 290Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 290

Disassembly Thoroughly, clean the unit before disassembling itScrub all outside surfaces with stiff brush and hot, soapy
may cause flakes of paint to enter the hydraulic passages during assemblyTape the trim and tilt piston rods before paintingf11
1Screw the manual release valve inRemove the retaining ring using retaining ring pliersRemove the manual release valve2Inspect
O-ring andtwo plastic split rings on the manual release valve for nicks and cutsInspect tip of valve for damageThe two plastic
spit rings are not available separatelyIf rings are damaged, replace the manual release valve2 rJl f.41 3Remove reservoir