1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 295Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 295

20Using OMC Rod Holder, PIN 983213, clamp rod tightly in viseLubricate end cap and slide it on the rod Install wear plate
and install the manual release valveThread i the valve all the way into the manifold and torque to 45-55 inIbs(5-6 Nm)Install
the retaining ring with the sharp edge of the ring facing outr; 4Lubricate new motor a-ringPlace it on the motor and attach
the motor to the pump manifold assembly with four Pozidriv screwsTorque the screws to 35-52 inIbs(4-6 Nm)Secure wire shield