1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 303Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 303

Trim "OUT" Tiit "UP" Mode f7l When operating the hydraulic unit in the trim "out"tilt "up" mode, hydraulic fluid is routed
valve and back to the pumpIt is important to note that all fluid on the return path returns to the pumpBecause the trim and
tilt rods displace fluid at the top of the cylinders, the fluid returning to the pump through the reverse lock check is not
sufficient to supply the pump, so additional fluid is drawn from the reservoir5When both the trim and tilt rods are fully
extended and the pressure exceeds 1500 psi (10500 kPa), the trim-up relief valve will open, directing the fluid to the reservoir6When
the hydraulic unit is trimming outtilting up or when the engine is running in forward gear, the following valves must hold