1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 304Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 304

Trim IIINII ITiit IIDOWNII Mode Isl When the hydraulic unit is in the trim "in"tilt "down" mode, the hydraulic fluid is routed
pump5Because of the volume of fluid displaced by the tilt and trim rods, less fluid is required above the tilt and trim pistons
than is being supplied to the pump from beneath the pistonsSome of the fluid from the outlet side of the pump is returned
to the reservoir through the trim-down pump relief valve 6If the switch is held in the down position after the trim and tilt
rods are retracted, the pressure buildup will open the trim-down pump relief valve and thefluid will be directed back to
the reservoirThis valve opens at approximately 800 psi (4200 kPa)7When the hydraulic unit is tilting downtrimming in, or