1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 320Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 320

1341 16With the tilt cylinder secured in soft-jaw vise, slide the band over the cylinderOil and install the O-ring on the
screws, washers, and O-ring Replace any components, if necessaryreservoir filter Q) 1381 20Remove the three screwsmanifold
plate 0), and 1391 21The three screws for the manifold plate each have flat washer and lock washerClean and inspect all components
of the manifold plate, paying particular attention to cleaning of the reservoir filtermanifold screws into it and then pulling