1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 327Get this manual

1994 Johnson/Evinrude "ER" CV 85 thru 115 outboards Service Manual, Page 327

11Oil and install the valve Thread the valve all the way Into the manifold Tighten the valve to torque of 45-55 in.lbs(5-6
three screws evenly so that the plate does not become cockedTighten the screws to torque of 25-30 inIbs(2,8-3,4 Nm)15Clean
the oil reservoirInstall new O-ring on the reservoirr:w5l 16Position the oil reservoir on the manifoldInstall the three retaining
screws with lock washersTighten the three screws securelyf161 17Oil the components of the expansion relief valveUsing your
thumb, press the valve seat CD and O-ring into the manifoldThen, press the valve core Q) and O-rings into the seatInsert