1994 Johnson/Evinrude Electric outboards Service Manual, Page 49Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 49

Continuity TestPositive Circuit, 24 Volt Foot Control INotel To avoid damaging components or troubleshooting equipment, disconnect
repair or replace battery cable 8Connect second meter lead to RED 16-Galead at battery side of ONOFF switch: The meter must
show continuity9Move 1224 Volt switch to "24 V" position []] 10Move first meter lead to RED battery cable: The meter must
show continuity If meter shows no continuity in either test, replace 1224 Volt switch 11Connect second meter lead to RED
16-Galead at terminal"A" of speed control switchDepress ONOFF switch: The meter must show continuity If meter shows no continuity,
replace ONOFF switch or wiring12Connect second meter lead to GREENWHITE 18-Galead at terminal"3" of speed control switchTurn
speed control to speed and depress ONOFF switch: The meter must show continuity If meter shows no continuity, refer to Speed