1994 Johnson/Evinrude Electric outboards Service Manual, Page 55Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 55

Continuity TestNegative Circuit, HBF2 INote To avoid damaging components or troubleshooting equipment, disconnect the battery
battery cable connection reseal wire at test area with OMC Black Neo- prene Dip rn 4Remove the in steering housing: Test
BLACK lead at steering housing coverboth sides of splice Meter must show continuity If meter shows no continuity, repair
or replace base-tosteering-housing wire INote Completely reseal wire at test area with prene Dip OMC Black Neo- 5Connect
second meter lead to the lower port side brush Meter should show continuity If meter shows no continuity, repair or replace
connection or black motor tube wire 6Move second meter lead to skeg: The meter must show no continuity to any metal component