1994 Johnson/Evinrude Electric outboards Service Manual, Page 68Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 68

Assembly 1Position steering housing and ring on the motor tubeAlign the set screws with existing dents in motor tube and
screw backwards until screw drops into the original threadsbefore turning screw forwardIf screw is allowed to form new theads
with each use, screw will deform material until the screw pulls out 4Apply OMC Tripe-Guard grease to the spring on the rotary
switch5Apply OMC Tripe-Guard grease to the control handle6Install the control handle and the stop 7Apply OMC Screw Lock to