1994 Johnson/Evinrude Electric outboards Service Manual, Page 72Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 72

3Slide the adjustment ring, bearing, and race onto the motor tubeLubricate the bearing with OMC Triple-Guard grease 4Place
by the retaining pin as it is pressed in place 8Install the driver on the pinion retaining pin 1221 1231 9Apply OMC Screw
Lock to pinion set screw and installTighten set screw to 8-12 inIbs(0,9-1,4 Nm) 10Apply OMC Screw Lock to adjustment ring
set screw threads Hold the motor tube down and push the adjustment ring up to rem ove bearing backlashTighten set screws
to torque of 35-45 in Ibs(4,0-5,1 Nm) for stainless steel rings, and 25-35 inIbs(2,8-4,0 Nm) for plastic rings11Push down