1994 Johnson/Evinrude Electric outboards Service Manual, Page 75Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 75

10Remove steering housing set screws only if the housing is to be removed from the mounting tube, or if the bearing cup is
tube, aligning holes and set screw marksTap bearing cup into mounting tube with holes alignedInstall steering housing screwsTighten
to 8-11 inIbs(0,9-1,2 Nm) 2Tap bearing cup into bottom of mounting tubeSlide the adjustment ring and bearing on to the motor
tube 3Lubricate bottom bearing and cup with OMC Triple-Guard greasePlace the mounting tube and steering housing assembly