1994 Johnson/Evinrude Electric outboards Service Manual, Page 82Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 82

Installation []] 10Spray steering cable with liquid soap and insert cable into sleeve from steering housing end 11Apply OMC
rackHold down cover and install long (silver colored) screws at locations marked "L"Install short (brass colored) screws
at locations marked "5"Tighten screws to 7-10 inIbs(0,8-1,1 Nm) INote Always turn self-tapping screw backwards until it drops
into the original threadsbefore turning it forwardIfthe screw is allowed to cut new threads with each use, eventually too