1994 Johnson/Evinrude Electric outboards Service Manual, Page 83Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 83

15Turn motor straight ahead, and place cover on steering housing with direction indicator pointing straight ahead 16Tighten
to have equal travel in both directions, turn pivot block clockwise, further onto the threadsIf motor must turn more to the
left: turn pivot counterclockwise, not as far onto the threadsTemporarily install pivot block pin and recheck motor travel
in each directionRepeat these two steps until motor has equal travel in both directionsInstall E-rings on pivot block pin3Reinstall
foot pedal base plate Always turn self-tapping screw backwards until it drops into the original threadsbefore turning it