1994 Johnson/Evinrude Electric outboards Service Manual, Page 93Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 93

Installation Wakefield Thermal Joint Compound to new resistorThe compound should fill all space between the resistor and
as follows: [[] Install new O-ring W []] 1Apply groove of motorred and green wires of Slide heat shrink tubes motor Connect
adapter and motor red wires with spliceCrimp and solder spliceINotel Use only rosin core solderDo not use an acid core solder
Connect black adapter wire to green motor wire with splice Crimp and solder splice Slide heat shrink tubes suitable heat
source= over splices and shrink with a Apply OMC Nut Lock to threads of motor retaining screws Attach motor to adapter being