1994 Johnson/Evinrude Electric outboards Service Manual, Page 98Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 98

Motor OffsetAll Models 1Clamp motor tube and motor on flat surface with the motor tube bends on the flat surface as illustrated2Loosen
by their shapes, as shown All Standard-Thrust motors have skeg with straight trailing edge All High-Thrust motors have curved
trailing edge on the skeg 12 Volt High-Thrust motors have long pointed skeg 1224 Volt High-Thrust motors have long skeg with
the point cut off Standard-Thrust motors have skegs shaped as shown in andthe narrower skeg being on the HBF2 model5Finish