1994 Johnson/Evinrude Electric outboards Service Manual, Page 132Get this manual

1994 Johnson/Evinrude Electric outboards Service Manual, Page 132

ONOFF Switch ServiceAll Models Removal 1Remove screw retaining switch and bracket2Unsolder and remove two wires from switch
as shown on wiring diagram at the end of this sectionINotel Use only rosin core solderDo not use acid core solder10Coat solder
terminals with OMC Black Neoprene Dip 6Place bracket on switch7Install nut and tighten securely 11Install switch and bracketTighten
retaining screw to 40-60 inIbs(4,5-6,8 Nm), 16-18 inIbs(1,8-2,0 Nm) for HBF2 INotel Always turn self-tapping screw backwards