1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 73Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 73

Connector Housing rgllf O-ring in fuel connector becomes damaged, air may enter the fuel line, resulting in motor surging
the O-ring and its seat with the hook in flat or horizontal position4Twist the hook around to grasp the O-ring, then pull
outDiscard O-ringTo install new O-ring in the connector, proceed as follows: 1Place drop or two of oil on the O-ring 2Place
the O-ring on face of the connector3Push the plunger down with the straight instrument4Pinch the O-ring together and gently
push into position with fingersWhen reassembling the fuel hose, check for cracks in the primer bulb or in the hoseThe primer
bulb must be attached so that fuel flow is from the" shorter to the longer hose lengthFuel flow through the primer bulb is
indicated by an arrow"" Check for leaks by connecting fuel tank hose to motor and squeezing primer bulb until definite pressure
is felt in the bulb O-Ring Hose (2) Clamp (6) Inlet Valve Primer Bulb CD Outlet Valve Q) Connector Housing Assembly (2) Safety