1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 81Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 81

Assembly 1Position the spring and washer on the plunger shaft 11612Install two new O-rings and quad-ring onto plunger shaftr,]l3Install
hose to the large nipple and place the other end of hose in container of alcoholConnect hose to the small nipple and place
other end of hose to drain into containerHold primer pump in horizontal position as it would be installed on the engineMove
plunger back and forth ten timesPrimer should pump approximately 10 cc of alcohol in ten strokesIf pump fails to pump alcohol,