1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 120Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 120

Power Pack power pack has several basic functionsIt stores and distributes the voltage received from the charge coilThe power
switch are connected to the power pack through the engine wiring harnessWhen activated, these switches direct the power pack
output to ground, stopping the ignition system steering contains combination stop switch emergency stop device When the clip
and lanyard assembly is removed, the emergency stop device is in the STOP position When the clip and lanyard assembly is
installed, the emergency stop device is in the RUN position To stop the engine when the clip and lanyard assembly is in place,
press the stop button inward until the engine stopsIgnition Coil ignition coil consists of two windings of wire wrapped around
compacted ferrite coreThe coil has primary and secondary terminal connections and ground plate Through mutual induction,