1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 125Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 125

Ignition Plate ServicingCD IIAmp Removal i twist and remove all spark plug leads "'" 1To avoid accidental starting of engine
of the four support plate screwsInstall and tighten the screws to torque of 48-60 inIbs(5-7 Nm)2Apply OMC Moly Lube to crankcase
boss3Lubricate the ignition plate bearing groove with OMC Moly Luber;] 4Apply OMC Nut Lock to the threads of the five ignition
plate screwsInsert needle-nose pliers into slots in the ignition plate bearing and compress bearing while guiding the ignition
plate into position5Align the ignition plate with the retainer plateTighten the five screws to torque of 25-35 inIbs(2,8-4,0