1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 128Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 128

f3l 3Remove the three timer base retaining clipsRemove timer base from adapter4Remove timer base retainer 5Remove the three
OMC Moly Lube grease around powerhead boss and EJ timer base bushingand into retainer groove 0 5Lubricate timer base retainer
with outboard lubricant!al 6Install retainer in timer base groove with retainer tabs positioned to right of leverSqueeze
tabs and insert timer base into adapter I!] 7Position the three retainer clamps on adapterf3l 8Apply OMC Nut Lock to the
three retainer clamp screwsInstall screws and torque them to 25-35 inIbs(2,8-4 Nm)9Connect the timer base 3-pin Amphenol