1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 135Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 135

Ohmmeter TestStop Button Notel All ohmmeter tests must be performed with the engine NOT running1Most steering handles contain
stop the engine when the clip and lanyard assembly is in place, press the stop button until the engine stops2Install the
clip and lanyard1sl 3Calibrate an ohmmeter on appropriate scaleConnect meter leads between ignition plate end of connector,
terminal "E", and clean engine ground The meter must show high reading4Momentarily, press inward on the stop button The meter