1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 137Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 137

STEPCHARGE COIL TEST Ground Test [2] 1Disconnect 5-pin Amphenol connector2Set peak-reading voltmeter to "POS" and "500"f7l3Alternately,
and repair ground, or replace charge coil Rope or Amp PCE0068 4If no reading is indicated in Step 3, go to Output TestOutput
Test 1Set peak-reading voltmeter to "POS" and "500"!al2Attach voltmeter black lead to charge coil terminal" A"Attach meter
red lead to the other charge coil terminal3Crank engine and observe meter reading: If meter shows 230 volts or higher, go