1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 166Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 166

32Apply light coat of outboard lubricant to the corners of the connecting rod and rod capPlace frame on connecting rod using
rodThe groove lines on the jaws must be centered on the rodcrankpin diameterThe above procedure must be followed to assure
frame is squarely in position 341 33Tighten the forcing screw to torque of 23 inIbs(2,5 Nm)34Loosen both rod cap screws 1f4
turn351 35Apply preliminary torque of 40-60 inIbs(5-7 Nm) to both rod cap screws36Apply final torque of 30-32 ftIbs(40-43