1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 186Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 186

rw 8Usingthea inner handlemallet, steering handle.steel pin that punch and drive out the retains in the f161 9Remove the
the steering handle components for wear, cracks, or damageReplace parts if necessaryPut protective sleeves on throttle cable
and terminal wires 3Refer to Ignition System, Section 3, to test stop switchAssembly 1Install the throttle cable seal into
inner handle If removed, apply Loctite Depend 300 adhesive to inner handle at areas shownand drive the outer handle into
place 118l 3Install the metal outer handle over the plastic inner handle rw 4Secure tab ofsteel inner handle into recess