1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 202Get this manual

1994 Johnson/Evinrude Outboards 40 thru 55 Service Manual, Page 202

5Assemble the port and the starboard stern brackets onto the swivel bracketInstall the tilt shaft bolt through the following
the 78 inhead screw through the port stop link wave washer Ml, and port stern bracketInstall and tighten the nut to torque
of 144-168 inIbs(16-19 Nm)Install the 3f4 inhead screw through the starboard stop link and stern bracketInstall and tighten
the nut to torque of 144-168 in lbs(16-19 Nm) thread from being flush with the castingIf these screws are not patch lock
screws, apply OMC Ultra Lock to threads of screws before installing Place the steering friction bushing in the swivel bracket
with groove in line with the setscrews Apply OMC Triple-Guard grease to the steering friction pin Install the pin in the